Motors for general industrial use of the AIR series (with power assigned to standard sizes in accordance with DSTU ІЭС 60034-1:2019), series 2AIR (with power assigned to standard sizes according to DIN 42673 and DIN 42677 (CENELEC)), power from 0.12 kW to 630 kW voltage 220, 230, 345, 380, 440, 660 Volts (depending on frequency (Hz) or at the request of the Buyer, for countries near and far abroad).
Explosion-proof motors of the AIM series (for operation in hazardous areas of the chemical, gas, oil refining industries), AIU, AIU(V) series (intended for operation in coal mines and mines, including those hazardous for gas and (or) dust), AIU ( K) (designed to drive scraper and belt conveyors, to drive mining machines and installations, especially for roadheaders in coal mines hazardous for gas and dust), power from 0.75 kW to 315 kW, voltage 220/380, 380/660, 660/1140 Volts.
Motors are asynchronous three-phase crane and metallurgical electric motors with phase and squirrel-cage rotor series: MTN(F)U, MTKN(F)U, 4MTN(F)U, 4MTKN(F)U, 4MTMU, 4MTKMU (designed for operation in electric drives of metallurgical units and lifting and transport mechanisms of all types and other equipment in the metallurgical industry, construction and other industries, for operation in macroclimatic areas with temperate (U), tropical (T) and moderately cold (UCL) climates in conditions determined by placement category 1 and 2 according to GOST 15150-69), with power from 1.4 kW to 160 kW.
Motors are single-phase asynchronous electric motors of the AIRE series with a squirrel-cage rotor (used to complete household and industrial appliances of small power), with a power from 0.37 kW to 3.0 kW.
Three-phase asynchronous electric motors with a built-in electromagnetic brake (designed to drive mechanisms that require a fixed stop at a regulated time), with a power from 0.75 kW to 45 kW.
Asynchronous roller table electric motors of the ARMU series (designed for individual drive of roller table rollers, for completing cable drum drives for tower cranes, as well as other drives at metallurgical enterprises for operation in macroclimatic regions with temperate (U), tropical (T) and moderately cold (UHL) ) climate in conditions determined by placement category 1, 2 and 3 according to GOST 15150-69).
Asynchronous, high-voltage electric motors of the A4 series (with a squirrel-cage rotor) are designed to drive mechanisms that do not require speed control, as well as to drive pumps, fans, blowers, smoke exhausters and other mechanisms with similar characteristics at start-up, including for driving mechanisms for their own needs thermal power plants), degree of protection IP23, power from 200 kW to 3150 kW, voltage 3000, 6000, 10000 Volts. Can be manufactured to work with a frequency converter or a wound rotor.
Asynchronous closed blown three-phase electric motors with a squirrel-cage rotor of the DAZO4 series (designed to drive mechanisms that do not require speed control, as well as to drive pumps, fans, blowers and other mechanisms with similar characteristics at start-up, including to drive mechanisms for thermal auxiliary needs power plants), degree of protection IP54, power from 200 kW to 2500 kW, voltage 3000, 6000, 10000 Volts. Can be manufactured to work with a frequency converter or a wound rotor.
Electric motors VAO2 and VAO2U with explosion protection marking PB 4B (RV 4VIa for motors with a stator winding temperature sensor) are intended for operation in coal mines, including those hazardous due to gas and (or) dust; VAO2 motors with explosion protection marking IExdIIBT4 (IExdiaIIBT4 for motors with a stator winding temperature sensor) are designed for operation in explosive areas in accordance with NPAOP 40.1-1.32-01 “Rules for Electrical Installations”, with a power from 200 kW to 2500 kW.
Asynchronous electric motors with a squirrel-cage rotor for general purpose, frequency-regulated (designed to operate as part of a single and (or) group frequency-regulated
