Skip to main content

Pump type
PE 380-185-5

Model: PE 380-185-5
Back to
category
Other models

Pump type
PE 380-185-5

Feed pumps PE 380-185-5 are designed for supplying feed water to medium and high pressure steam generators with a temperature not exceeding 438K (165°C), hydrogen index pH 7…9.5, solid particle content not more than 5 mg/l, size not more than 0.1 mm, as well as other neutral liquids similar to feed water in viscosity and chemical activity.

PE pumps by design – horizontal, centrifugal, multistage, sectional. Axial forces of rotors are unloaded by means of a hydraulic thrust bearing. End seals of rotors – mechanical or gland. Rotor supports are external sliding bearings with forced or ring lubrication. Torque from the motor to the pump is transmitted through a gear coupling.

Pump designation Supply, m3/h Pressure, m Speed, rpm Permissible cavit. reserve, m Pump efficiency, % Electric motor power, kW Pump weight, kg
PE 380-185-5-S 380 2030 3000 9 75 3150 10375
PE 380-185-5-T
with fluid coupling		 380 2030 3000 9 75 3150 10470
PE 380-185-5-Т 380 2030 3000 9 75 3150 10375

CHT Slovakia s.r.o. is a recognized leader in the production and sale of high-quality industrial pumps. Our PE 380-185-5 pumps are developed using the most modern technologies and strict reliability standards, ensuring uninterrupted operation in difficult industrial conditions. These centrifugal multistage pumps are ideally suited for tasks requiring high performance and durability.

FEATURES OF PUMPS TYPE PE 380-185-5

PE 380-185-5 pumps are horizontal, centrifugal, multistage sectional units designed for operation with feed water and similar neutral liquids. Key features include:

  • High performance: capacity up to 380 m³/h at a head of 2030 m.
  • Efficiency and economy: pump efficiency reaches 75%, motor power — 3150 kW, rotational speed — 3000 rpm.
  • Reliable design: axial forces of rotors are unloaded by a hydraulic thrust bearing, supports — external sliding bearings with forced or ring lubrication. End seals — mechanical or gland.
  • Torque transmission: through a gear coupling from the electric motor.
  • Additional parameters: allowable cavitation margin — 9 m, pump weight — from 10375 to 10470 kg (depending on modification).
  • Design options: models with hydraulic coupling are available (PE 380-185-5-С, PE 380-185-5-Т with hydraulic coupling) for adaptation to specific needs.

These features ensure minimal downtime, high wear resistance and compliance with requirements for operation with water temperature up to 165 °C, pH 7–9.5 and solid particle content not more than 5 mg/l (size up to 0.1 mm).

APPLICATION AREAS OF PUMPS TYPE PE 380-185-5

PE 380-185-5 pumps are widely used in energy and industry for supplying feed water to medium and high pressure steam generators. They are ideally suited for supplying feed water and other neutral liquids similar in viscosity and chemical activity. Main areas of application:

  • Energy sector: supply of boilers and steam generators at thermal power plants.
  • Industrial processes: pumping of purified water in chemical, petrochemical and metallurgical industries.
  • Water treatment: filtration and circulation systems in large industrial complexes.

Due to their versatility, these pumps are used in conditions where stable operation under high pressure and high flow rate is required.

HOW TO SELECT A SUITABLE PUMP TYPE PE 380-185-5?

Selection of a pump is a key stage to ensure the efficiency of your system. To select the optimal PE 380-185-5 model, consider the following factors:

  • Technical requirements: determine the required capacity (up to 380 m³/h), head (up to 2030 m) and liquid temperature (not higher than 165 °C).
  • Operating conditions: check compatibility with liquid composition (pH, solid particles) and availability of cavitation margin (minimum 9 m).
  • Modification: choose a version with hydraulic coupling to reduce vibrations or a standard model for basic needs.
  • Energy consumption: make sure that the power of 3150 kW corresponds to your electrical network, and evaluate efficiency to minimize costs.
  • Consultation with specialists: contact CHT Slovakia s.r.o. experts for calculation for your system — recommendations will be provided based on drawings and data.

Correct selection guarantees durability of the equipment and reduction of operating costs.

ORDERING PROCEDURE FOR PUMPS TYPE PE 380-185-5

Ordering pumps at CHT Slovakia s.r.o. is simple and transparent. Follow these steps:

  1. Request information: contact by email or phone, specifying the model (PE 380-185-5) and requirements.
  2. Consultation and calculation: engineers perform analysis and propose the optimal configuration.
  3. Preparation of application: confirm specification, price and delivery time.
  4. Order placement: sign the contract and make a prepayment.
  5. Production and delivery: the pump is manufactured within 4–6 weeks, with delivery across Europe and worldwide.
  6. After-sales service: warranty and support are provided.

Full documentation and certification are provided for each order.

HOW TO BUY A PUMP TYPE PE 380-185-5?

Purchase of the PE 380-185-5 pump at CHT Slovakia s.r.o. is a reliable and profitable step. For purchase:

  • Online request: fill out the form on the website eu-sumnt.com or send a request to info@eu-sumnt.com.
  • Direct contact: phone +421 2 444 567 89 or address: Röntgenova 3751/28, Bratislava, 85101, Slovak Republic.
  • Wholesale discounts: special conditions are provided for large orders.
  • Financial options: installment and leasing are available for partners.

Quality of a market leader and prompt delivery are guaranteed. Order the PE 380-185-5 pump today and increase the efficiency of your production.

FREQUENTLY ASKED QUESTIONS ABOUT THE PUMP PE 380-185-5

The PE 380-185-5 pump is intended for supplying feed water to steam boilers and steam generators. It is used in the energy sector and industrial thermal installations. The pump is designed for operation with water up to 165 °C. The equipment ensures stable supply of water under high pressure.

The pump is characterized by high capacity up to 380 m³/h and head up to 2030 m. It has efficiency up to 75% and is designed for long continuous operation. The design is resistant to wear and high loads. This ensures minimal downtime and reliable operation of the equipment.

The pump is used at thermal power plants and in the energy sector. It is used for supplying boilers and steam generators of medium and high pressure. The pump is also used in the chemical and petrochemical industry. The equipment is suitable for water treatment and circulation systems.

When selecting, it is necessary to consider the required capacity and head of the system. It is important to check the temperature of the liquid and the composition of the water. To reduce vibrations, a version with a hydraulic coupling is recommended. For precise selection, an engineering calculation should be performed.

To place an order, it is necessary to contact the sales department of CHT Slovakia s.r.o. Engineers will prepare a technical and commercial proposal. After agreement of parameters, a contract is concluded. Delivery is carried out across Europe and the countries of the former CIS, except RF and RB.