Author: info@eu-sumnt.com
Pump type
Pump type
Ks 32-150-2
Ks 32-150-2 pumps and pump units based on them are designed for pumping of condensate in steam and water networks of thermal power plants using fossil fuels, as well as of liquids in viscosity and chemical activity similar to condensate.
Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions.
Pump type
Ks 50-55-2
Ks 50-55-2 pumps and pump units based on them are designed for pumping of condensate in steam and water networks of thermal power plants using fossil fuels, as well as of liquids in viscosity and chemical activity similar to condensate.
Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions.
Pump type
Ks 50-110-2
Ks 50-110-2 pumps and pump units based on them are designed for pumping of condensate in steam and water networks of thermal power plants using fossil fuels, as well as of liquids in viscosity and chemical activity similar to condensate.
Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions.
Pump type
Ks 80-155-2
Ks 80-155-2 pumps and pump units based on them are designed for pumping of condensate in steam and water networks of thermal power plants using fossil fuels, as well as of liquids in viscosity and chemical activity similar to condensate.
Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions.
Pump type
PE 65-28
Centrifugal feed pumps PE 65-28 are designed to supply water to stationary steam boilers, with absolute vapor pressure up to 6.2 MPa (63 kgf / cm²). Feed water should have pH 7-9,2, the temperature not more than 438K (165° C) and should not contain solid particles.
Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions.
Pump type
PE 65-32
The PE 65-32 feedwater pump is a centrifugal pump designed to supply water to stationary steam boilers with absolute steam pressure up to 6.2 MPa (63 kgf/cm²). It is intended for superheated feedwater in thermal power plant boilers, as well as waste-heat boilers at power plants with combined-cycle and steam-driven units.
Feedwater Requirements:
- pH 7–9.2
- Temperature ≤ 438 K (165°C)
- Free of solid particles
Climate Rating: UHL for moderate and cold climates, indoor installation, category 4 per GOST 15150-69.
Pump type PE 65-40
The PE 65-40 feedwater pump is a centrifugal pump designed to supply water to stationary steam boilers with absolute steam pressure up to 6.2 MPa (63 kgf/cm²). It is intended for superheated feedwater in thermal power plant boilers, as well as waste-heat boilers at power plants with combined-cycle and steam-driven units.
Feedwater Requirements:
- pH 7–9.2
- Temperature ≤ 438 K (165°C)
- Free of solid particles
Climate Rating: UHL for moderate and cold climates, indoor installation, category 4 per GOST 15150-69.
Pump type PE 65-53
The PE 65-53 feedwater pump is a centrifugal pump designed to supply water to stationary steam boilers with absolute steam pressure up to 6.2 MPa (63 kgf/cm²). It is intended for superheated feedwater in thermal power plant boilers, as well as waste-heat boilers at power plants with combined-cycle and steam-driven units.
Feedwater Requirements:
- pH 7–9.2
- Temperature ≤ 438 K (165°C)
- Free of solid particles
Climate Rating: UHL for moderate and cold climates, indoor installation, category 4 per GOST 15150-69.
Pump type PE 90-110
The PE 90-110 feedwater pump is a centrifugal pump designed to supply water to stationary steam boilers with absolute steam pressure up to 6.2 MPa (63 kgf/cm²). It is intended for superheated feedwater in thermal power plant boilers, as well as waste-heat boilers at power plants with combined-cycle and steam-driven units.
- Maximum Flow: 90 m³/h
- Maximum Head: 1100 m
- Allowable NPSH: 5 m