Skip to main content

Author: info@eu-sumnt.com

Pump type
SE 2500-180-10

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps SE-TYPE.

The SE 2500-180-10 pump and the unit based on it are designed for pumping water in heating networks. Water must not contain solid particles larger than 0.2 mm and a concentration higher than 5 mg/l.

Pumps are manufactured in the UHL climatic version — intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in rooms (volumes) with artificially regulated climatic conditions according to GOST 15150-69.

Pump type
SE 5000-70-5

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps SE-TYPE.

The SE 5000-70-5 pump and the unit based on it are designed for pumping water in heating networks. The water must not contain solid particles larger than 0.2 mm or with a concentration higher than 5 mg/l.

Pumps are manufactured in the UHL climatic version — intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in premises with artificially controlled climatic conditions according to GOST 15150-69.

Pump type SE 5000-160-8

Pump type
SE 5000-160-8

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps SE-TYPE.

The SE 5000-160-8 pump and the unit based on it are designed for pumping water in heating networks. The water must not contain solid particles larger than 0.2 mm and with a concentration exceeding 5 mg/l.

The pumps are manufactured in UHL climate version — intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in rooms (volumes) with artificially controlled climatic conditions according to GOST 15150-69.

CENTRIFUGAL PUMP
TSN 400-105

Written by info@eu-sumnt.com on . Posted in CNP-TYPE PUMPS, Pumping equipment.

The CN 400-105-C centrifugal pump and the electric pump unit based on it are designed for pumping water and liquids with properties similar to water in terms of viscosity and chemical activity, with temperatures up to 373 K (100º C), solid content by mass up to 0.05%, and a maximum particle size of 0.2 mm.

The pumps are manufactured in climatic version UHL — intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in spaces with artificially controlled climatic conditions according to GOST 15150-69.

Certificate of Conformity Ukraine

CENTRIFUGAL PUMP TSN 400-210

Written by info@eu-sumnt.com on . Posted in CNP-TYPE PUMPS, Pumping equipment.

The TSN 400-210-C centrifugal pump and the electric pump unit based on it are designed for pumping water and liquids with properties similar to water in terms of viscosity and chemical activity, with temperatures up to 373 K (100º C), solid content by mass up to 0.05%, and a maximum particle size of 0.2 mm.

The pumps are manufactured in climatic version UHL — intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in spaces with artificially controlled climatic conditions according to GOST 15150-69.

CENTRIFUGAL PUMP
TSN 1000-180-3

Written by info@eu-sumnt.com on . Posted in CNP-TYPE PUMPS, Pumping equipment.

CN Pump CN 1000-180-3-c and the electropump unit based on it are designed for pumping water and liquids with properties similar to water in viscosity and chemical activity, with temperatures up to 373 k (100º c), solid content up to 0.05% by mass, and maximum particle size of 0.2 mm.
The pumps are manufactured in uhl climatic version — intended for macroclimatic regions with moderate and cold climate, installation category 4 — operation in rooms (volumes) with artificially controlled climatic conditions according to GOST 15150-69.

CENTRIFUGAL PUMP
D 1250-125-1

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps D-TYPE.

Centrifugal pump type D 1250-125-1-C and electric pump unit on its basis is designed for pumping water and liquids with viscosity and chemical activity similar to water, with temperature up to 85 ºС, with content of solid inclusions not exceeding 0,05% by mass, with maximum size of 0,2 mm, microhardness not exceeding 6,5 GPa (650 kgf/mm2) and hereinafter referred to as pump (unit).

Pumps are manufactured in climatic version UHL – designed for macroclimatic regions with temperate and cold climate, placement category 4 – operation in rooms (volumes) with artificially regulated climatic conditions according to GOST 15150-69.

Centrifugal Pump D 2000-21-2
Model: D 2000-21-2

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps D-TYPE.

Centrifugal pump with double entry D2000-21-2 are designed for pumping of water and liquids having properties in viscosity and chemical reactivity similar to water, with temperatures up to 85 C °, with a content of solid inclusions not exceeding 0.05% by weight, with their maximum size of 0.2 mm, with microhardness not more than 6.5 MPa (650 kgf / mm²).

Pumps are manufactured in a climatic category of a moderately cold climate – they are designed for macroclimatic regions with temperate and cold climates, placement category 4 – operation in rooms (volumes) with artificially controlled climate conditions, in accordance with GOST 15150-69.

Centrifugal Pump D 2000-100-2

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps D-TYPE.

The D 2000-100-2 centrifugal pump and the electric pump unit based on it are designed for pumping water and liquids with properties similar to water in terms of viscosity and chemical activity. The temperature of the pumped liquid may reach up to 85 °C. The content of solid particles must not exceed 0.05% by mass, with a maximum particle size of 0.2 mm and microhardness not exceeding 6.5 MPa (650 kgf/mm²).

The pumps are manufactured in climatic version UHL, intended for macroclimatic regions with moderate and cold climates, placement category 4 — operation in enclosed spaces with artificially controlled climatic conditions in accordance with GOST 15150-69.

CENTRIFUGAL PUMP D 2500-62-2

Written by info@eu-sumnt.com on . Posted in Pumping equipment, Pumps D-TYPE.

The D 2500-62-2-S centrifugal pump and the electric pump unit based on it are designed for pumping water and liquids with properties similar to water in terms of viscosity and chemical activity, with a temperature of up to 85 °C. The content of solid particles must not exceed 0.05% by mass, with a maximum particle size of 0.2 mm and microhardness not exceeding 6.5 MPa (650 kgf/mm²).
The pumps are manufactured in climatic version UHL, intended for macroclimatic regions with moderate and cold climates, placement category 4 — for operation in enclosed spaces with artificially controlled climatic conditions in accordance with GOST 15150-69.